Veto PB5 Camo TT 5 Small Parts Bags (PB5 CAMO TT)

Veto PB5 Camo TT 5 Small Parts Bags (PB5 CAMO TT)

Description:

Veto Pro Pac’s PB5 CAMO (True Timber ® Kanati pattern) is a 5-Pac solution to resolve clutter issues. This 5 pac of bags provides tool storage for small tools, fasteners, wire nuts or outdoor related items (range, boating, fishing, camping, hunting, etc.) & assorted items. A multi-purpose parts bag for jobsite & everyday use.

PRODUCT DIMENSIONS:

• Height: 5"
• Length: 8"
• Weight: 2 lbs. 

SPECIFICATION:

• 600 Denier Nylon body fabric (reduces wear and tear)
• See-through side mesh panel
• Zippered access
• Color-coded webstrips
• True Timber Kanati pattern
• Swivel Snap Hooks which attach to any Veto Pro Pac Bag's D-rings

VETO PRO PAC TOOL BAGS PRODUCT CARE AND MAINTENANCE:

Keep the Zippers Clean & Lubricated

Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.

Protect the Zippers From Sharp Objects and/or Excessive Heat

Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.

Don’t Overstuff the Bag

Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed…proceed with caution!