No-File w/ Lower Ball Bearing Guide
Amana No-File Trimming Bit with Lower Ball Bearing Guide
Eliminate the time-consuming hand-filing that normally follows each trimming cut on a laminate job. Our patented No-File bit "breaks" the sharp edge as it trims the laminate flush. When used properly, the resulting edge is smooth and has a slight radius. NOTE: 47154 is for laminates 0.025" - 0.038" thick (.4mm radius). , 47150-47152 are for laminates 0.042" - 0.052" thick (1.5mm radius).
