Kreg Routing Systems

The Mini Trak can be used to produce countless types of woodshop jigs and fixtures, such as taper jigs and cut-off sleds. An adaptation of our other popular styles of Trak, Mini Trak features a T-slot that captures the head of a standard 1/4" (6mm) hex...

Take control of your table-mounted router for quick, accurate, reliable, and repeatable setups  The Precision Router Lift helps you elevate your routing capabilities by providing precise control when making router setup changes or changing bits. The...

Kreg Phenolic Router Table Insert Plate - Undrilled BLANK (PRS4038) This plate has shallow starter holes molded into the underside for many popular router screw patterns.  For many routers, all you have to do is line up the sub-base with teh...

Kreg Phenolic Router Table Insert Plate - Pre-drilled Bosch/Porter-Cable (PRS4036) This plate has pre-drilled holes that match the pattern of the Porter-Cable 690 and 890, as well as the Bosch 1617.  Screws are included, so mounting one of these...

Kreg 3/8" Standard Beading Bit (PRS4260) This 3/8" Standard Beading Bit is used for creating 3/8"-deep beading profiles.This bit works with Kreg® 3/8" Notching Bits (PRS4210 and PRS4215). 3/8" (9mm) Standard Beading Bit...

Kreg 5/16" Standard Beading Bit (PRS4255) This 5/16" Standard Beading Bit is used for creating 3/8"-deep, stepped beading profiles.Works with with Kreg® 3/8" Notching Bits (PRS4210 and PRS4215). 5/16" (8mm) Standard Beading Bit For...

Kreg 1/4" x 2" Beading Bit (PRS4250) This 1/4" Beading Bit is used for creating 1/4"-deep beading profiles. Works with 1/4" x 11/2" Notching Bit (PRS4200) and 1/4" x 2" Notching Bit (PRS4205) 1/4" (6mm) Notching Bit for...

Kreg 3/8" x 2" Notching Bit (PRS4215) This 3/8" Notching Bit is used for creating 3/8"-deep notches for all 5/16" and 3/8" beading profiles.Provides one-pass operation for cutting a notch for 2"-wide rails. 3/8" (9mm) Notching Bit...

Kreg 3/8" x 1 1/2" Notching Bit (PRS4210) This 3/8" Notching Bit is used for creating 3/8"-deep notches for all 5/16" and 3/8" beading profiles.Provides one-pass operation for cutting a notch for 11/2"-wide rails. 3/8" (9mm) Notching...

Kreg 1/4" x 2" Notching Bit (PRS4205) This 1/4" Notching Bit is used for creating 1/4"-deep notches for 1/4" beading profiles. This bit works with the 1/4" Standard Beading Bit (Item# PRS4250). Provides one-pass operation for cutting...

Kreg 1/4" x 1 1/2" Notching Bit (PRS4200) This 1/4" Notching Bit is used for creating 1/4"-deep notches for 1/4" beading profiles. This bit is included with the Precision Beaded Face-Frame System, and works with the 1/4" Standard...

Kreg Precision Router Table Top (PRS1025) Solid, Secure & Quiet Routing SolutionThis rugged MDF table top provides a solid, secure, and quiet routing solution for any workshop. A 1"-thick (25mm) MDF core provides a flat, solid top that absorbs...