Kreg Precision Router Table Fence (PRS1015)
Unmatched Versatility, Incredible Adjustability
This innovative, anodized-aluminum fence features a table saw-style T-square adjustment system that ensures the fence will always stay parallel to the miter-gauge slot. The fence adjusts easily with just one hand, and locks firmly in place with dual locks: A large paddle lock on the infeed end, and a quarter-turn lock on the outfeed end that prevents fence deflection.
A magnified measuring system with an adjustable measuring scale allows accurate setup with any bit. The included Micro-Adjuster allows you to dial in precision measurements exactly.
Independent Sliding Fence Faces
Independent sliding fence faces can be positioned exactly where needed to provide workpiece support close to the bit, and to maximize chip collection into the fence’s built-in dust port.
Built-In Jointing Feature
Two jointing rods come included in this system. Just slide them into position behind the outfeed fence face, and the fence doubles as a jointer for putting perfect edges on boards.
Get real precision on any router table. A single-side, universal-mounting design allows the fence to be securely attached to most router table tops from 3/4" to 11/2" (19-38mm) thick.
Note: Router bit hole must be located 16" (406mm) from right side of table. Fits 1"-thick (25mm) tables without modification. Thinner or thicker tables may require modification.
|Fence Material|| |
36" (914mm) heavy-duty anodized aluminum
|Fence Faces|| |
Independent sliding faces with laminate surface and dual locking bits
Innovative, self-squaring T-square style
|Mounting Capability|| |
Tables between 3/4" (19mm) and 11/2" (38mm) thick
|Jointing Depth Adjustments|| |
1/16" (1.5mm) and 1/32" (0.8mm)
Anodized-aluminum fence body, adjustable faces, T-square style saw carriage, micro-adjust wheel, jointing rods, measuring tape, dust-collection port, bit guard, assembly hardware, and owner’s manual.