Tormek T-8 Sharpening System
The Tormek T-8 sharpening machine maximizes the precision with its revolutionary fully cast housing. This new design, together with a number of elaborated details, gives you the best conditions possible for a successful sharpening with top results.
The advanced design ensures an unbeatable precision for the Universal Support, which is the foundation of the Tormek sharpening system, since it controls all grinding jigs anmdf accessories. The former mounted sleeves for the Universal Support are now integrated in this model's fully cast machine housing. This update will increase the accuracy in your sharpening.
The characteristic drive system of Tormek is also implemented in the new model. the efficient system manages to maintain a constant speed, even under full load - something unique for Tormek's sharpeners. Tormek Original Grindstone SG-250 sharpens all qualities of steel, including HSS. The powerful AC motor is designed to drive the full grindstone during continuous use.
The water trough has been further improved with a screw lift for an easier fitting. It also has a double function magnetic scraper; during sharpening the magnet collects steel particles and after sharpening the scraper will make it easy to clean the water trough. For long tools that may drip water outside the water trough, you can easily fit the included water chute onto the edge of the trough.
The stainless steel main shaft with Tormek's unique EzyLock nut will automatically set the stone to the right torque without tools. EzyLock also makes it easy to switch stones if you work with Tormek's special stones SB-250 or SJ-250.
- TT-50 Truing Tool
- PA-70 Honing Compound
- WM-200 Angle Master
- SP-650 Stone Grader
- HB-10 Handbook
- SE-77 Square Edge Jig
- Patent: SE 538962, SE 538642, EP 2946881, EU Reg. No 002984088-0001, CN Reg. No 201630384930.1, Patent Pending SE, EP, US
- Dimensions: Width 270 mm (10 5/8"), Depth 270 mm (10 5/8"), Height 330 mm (13")
- Weight: Shipping weight 18.2 kg (40.1 lbs), Machine only 14.8 kg (32.1 lbs)
- Grindstone: Tormek Original Grindstone, Aluminium oxide, ∅250×50 mm (10"×2") 90 rpm, torque 14.7 Nm
- Leather Honing Wheel: ∅ 220×31 mm (8 5/8"×1¼")
- Main Shaft: Stainless steel main shaft, stone hardware and EzyLock.
- Housing: Zinc cast top and frame. Sides in ABS plastic.
- Motor: Industrial single phase, 200 W (input) 230 V, 50 Hz or 115 V, 60 Hz. Continuous duty, Maintenance free. Silent running, 54 dB. 25,000 hour life
- Warranty: 7 years*