Amana 658040 Carbide Tipped Dado 8 Inch Dia x 46T ATB/FT -5 Deg, 5/8 Bore, Dado Set with Five 2-Wing Chippers

Dadoes (cross-grain cuts) and grooves (cuts with the grain) are cut efficiently on the table saw with a dado stack set. Unlike a wobbler, a stack set produces a flat-bottom cut with chip-free edges. Amana Tool® makes dado stack sets for every machine and every type of woodworking material. The standard width capacity ranges from 1/4" to 13/16". Additional chippers may be purchased separately to expand the capacity beyond 13/16". The standard set, regardless of diameter or tooth count, consists of two outside saw blades and four inside chippers. The outside blades feature hollow-ground plates for proper clearance, and alternate top bevel (ATB) grind with every sixth tooth flat ground (FT).

For plywood and melamine, the sets with 46-tooth outside blades are recommended.

Specs:

Diameter: 8" (200mm)

Teeth: 46

Bore: 5/8"

Tooth Grind: ATB/FT

Hook Angle: -5°

Kerf: 1/4" - 13/16"