Mafell DuoDoweler DDF 40 MAXIMAX in T-MAX (918623)

UPC:

4032689217994

MPN:

918623

Availability:

Usually Ships in 3-5 Business Days - Subject to Change

Description

Description

Mafell DuoDoweler DDF 40 MAXIMAX in T-MAX (918623)

The DuoDoweler DDF 40 introduces greater ease and efficiency to the task of drilling accurate dowel holes. Its hallmarks are a broad range of applications, a new ergonomic design for easy handling, and absolutely aligned, stable joints.

Whether in the workshop or on site, no other hand-held power tool can produce such high-quality joints.

When producing corner joints, partitions or rows of holes, the DDF 40 offers not only the precision of a stationary machine, but also the cost savings associated with standard wooden dowels.

In addition, the technique of using dowels in pairs already achieves outstanding stability at the dry assembly stage.

Technical Data

Drilling depth: 0 to 1-9/16"
Drill bit spacing: 1-1/4" (32mm)
Tilt range: 0 to 90°
Chuck diameter: 5/16"
Maximum bit diameter: 1/2"
Minimum bit diameter: 1/8"
Nominal speed - no load: 9,500 RPM
Motor: 120 V / 60Hz

Applications

Rows of holes
Drilling for fittings/hardware
Ideal for carcass and staircase construction in the workshop and on site
Compatible materials include solid wood and board materials
All types of joints from 3 - 12 mm (1/8 in. - 1/2 in.)

Advantages

The rotary knob and scale allow the tilting fence to be accurately repositioned up to a height of 62 mm (2 7/16 in.) . Regularly occurring dimensions can be preset by way of the turret.
Two spring-loaded pins in the baseplate enable the user to drill holes at a fixed distance of 15,5 mm (5/8 in.) from the edge of the work; repetitive drilling without any measuring or marking is simple.
The ergonomic motor housing, with a molded grip at the front and a hump at the rear, gives the operator a perfect hold no matter what the job, while ensuring the ideal transmission of force to the machine.
The tilting fence is located on two columns and fastened with a single adjusting screw. For miter joints, it tilts continuously from 0 through 90 degrees. Indexing stops are provided at 22.5°, 45° and 67.5°.

Includes

Two 6mm Hardened Steel Drill Bits (~1/4")
Two 8mm Hardened Steel Drill Bits (~5/16")
6 x 30mm Dowels (350 Pieces)
8 x 30mm Dowels (200 Pieces)
Two Anti-Slip Mats
8.4 fl oz Empty Glue Bottle
5/16" Dowel Nozzle
Hose Connector
Allen Key with Handle
ZA Auxiliary Rest
ZAG Additional Stop Set
PAZ Position Indicator
SA 320 Side Fence Set
LA Stop Pin Insert for Battens
13.1 ft Cord
T-MAX Carrying Case