Lamello Invis Mx2 Starter Kit (6100302)

Lamello Invis Mx2 Starter Kit (6100302)

The Invis Mx2 is a unique, magnet-driven furniture connector for the highest demands in terms of aesthetics, stability and productivity. With no visible openings, the Invis Mx2 is quickly connected and disconnected via its magnet drive. The rotating MiniMag tool drives the screw inside the connector contactless and invisibly. The connector set requires two Ø 12 mm holes in both workpieces for preparation. A stationary drilling machine, a CNC machining center or the Rasto drilling jig supplied in the starter set can be used for these holes. It is important for the holes to be drilled with the necessary precision. The scope of delivery includes an insertion jig for the vertical screwing in of the insertion nut. The Invis Mx2 connector is screwed in without an insertion jig and automatically aligns itself vertically due to its length. The MiniMag and a cordless drill close the joint and apply a joint clamping force of up to 250 kg per connector. To achieve this high clamping force, the magnet-driven connector must be installed as close to the panel surface as possible. The distance from the outer edge to the center of the connector must not exceed 15 mm. The detachable furniture connector opens when the direction of rotation on the cordless drill is changed. The connector is ideal if clamps or other clamping aids would leave marks on components with a high-gloss finish or would slip off molded workpieces. The Invis Mx2 is also used to secure access flaps or to screw the last workpiece of a larger piece of furniture in an invisible manner. 

Applications:

• Fully hidden and detachable connecting fittings
• Assembly of table legs, steps on wooden stairs, or handrails
• Joints in workpieces with a high-gloss finish or that are molded
• Shelves or larger pieces of furniture detachable for transport
• Invisible locking mechanism on display cases or drawers

FEATURES

• Magnetically driven, detachable furniture connector
• Enormously high clamping force of up to 250 kg per connector
• Invisible connection for maximum aesthetics
• Wear-free detachable with MiniMag Mx2 and cordless screwdriver
• Ideal for high-quality furniture, lacquered or molded workpieces, tables, stairs

INCLUDES

• (20) Invis Mx2 with stud 14 mm
• Invis Mx2 screw bit
• Invis Mx2 insertion jig
• MiniMag Mx2 including flexible shaft
• Rasto perforated plate
• Positioning bolts
• Fastening screw
• Rasto drill bushings Ø12 mm
• Drill Ø12 mm
• Depth adjuster
• Spacer