Festool CSC SYS 50 EBI Table Saw Basic with CYC SYS UG Stand and TBX 8 Tabless Battery Energy Set (576821-577001-578947)

Festool CSC SYS 50 EBI Table Saw Basic with CYC SYS UG Stand and TBX 8 Tabless Battery Energy Set (576821-577001-578947)

The CSC SYS 50 cordless table saw is so compact that it fits into a Systainer. It‘s just as versatile in use, as it is tremendously convenient in size. Make rip cuts of up to 11“ (280 mm), cross-cut widths of up to 17-3/4“ (450 mm) and bevel cuts of -10° to 47°. The unique digital operation produces results with maximum precision—accuracy within a tenth of a millimeter (1/256“). The 2x18 V dual-battery system in combination with the brushless EC-TEC motor will impress you with its power and torque – you won‘t notice any difference compared with a corded tablesaw.  Together with the UG-CSC-SYS underframe, you have the perfect work table with built-in support for ripping and cross-cutting, and it collapses for easy transport from the vehicle to the site. The CSC SYS 50: The ultimate in portable precision.

Strengths and Benefits:

• Versatile: Parallel cuts up to 11“ (280 mm); cross cut width of up to 17-3/4“ (450 mm). Bevel cuts from -10° to 47°
• Practical: At a cutting height of up to 1-3/8“ (35 mm), through to bevel cuts down to -10°; ideal for back-beveling filler strips
• Compact and mobile: Can be easily carried with one hand and neatly stored in a Systainer format. Even easier to transport with the wheeled
• UG-CSC-SYS underframe
• Extreme precision: The height and bevel angle are electrically adjusted at the press of a button via the digital display – accurate to within a tenth of a millimeter (1/256“)
• Repeatable cuts are easy: The height and angle (mm and inches) are set parallax-free via the digital display, i.e., more accurately than any visual judgement. Repeatable cuts are a sure thing
• Convenient: Four saw blade positions can be saved and selected via the digital display
• Highly precise rip fence: Robust rip fence with double clamp (via just one clamp lever) for exact alignment and perfect cutting results
• Highly precise angles: The miter gauge is optimally aligned and centrally clamped via a groove on the sliding table. For miter angles between -70° and +70°

Made for interior finishing: With a guaranteed cutting height of 1-7/8“ (48 mm), all applications typical in interior finishing can be carried out.

More precise than any tape measure: The desired sawing height and angles are accurately entered to within 0.1 mm (1/256“) via the digital display and the dial. This adjusts the saw blade automatically.

Multi-language: The display can be set to your local language.

Systainer: Transport and protection: The Systainer hood is easily placed over the cordless table saw, allowing for easy transportation and protection.

1. Transport solution

2. Worktop

3. Underframe

Includes: 

• Fine 42 Tooth Saw Blade
• Rip Fence
• Push Stick
• Miter Gauge
• Dust Collection Bag
• Riving Knife
• Blade Guard and Splitter
• Hex Key
• WAF 6
• TBX 8 8.0 Tabless Battery Energy Set (578947)
• UG-CSC-SYS Underframe

Technical Data:

• Battery Voltage: 2x 18V Li-Ion
• Idle Speed: 4,500 - 6,800 RPM
• Arbor: 3/4" (20mm)
• Bevel Angle: -10° - 47°
• Cutting Height at 0°: 0" - 1-7/8" (0 - 48mm)
• Cutting Height at 45°: 0" - 1-11/32" (0 - 34mm)
• Miter Angle: 0 - 70°
• Parallel Cut Width: 11" (280mm)
• Tabletop Height: 11" (280mm)
• Dimensions (L x W x H): 20-5/32" x 15-19/32" x 11-21/32" (512 x 396 x 296 mm)
• Dust Extraction Connection Diameter: 1-1/16" (27mm)
• Battery Capacity: 5 Ah
• Weight (excluding battery): 45 LB (20.2kg)

Festool TBX 8 Tabless Battery Energy Set (578947)

For all applications and 18 V tools for a maximum power and endurance

(except: ETSC 125, RTSC 400, DTSC 400, CTC SYS).

Bluetooth® lithium-ion (Li-Ion) battery with tabless cell technology and AIRSTREAM cooling.

When the job demands more, the TBX 8 delivers. With 8.0 Ah capacity and tabless cell technology, this is the most powerful and longest-running battery in the Festool system built for high-demand tools like saws and dust extractors. Tabless technology reduces internal resistance, delivering more usable power with less heat. That means longer runtime, consistent performance under load, and faster charging. With AIRSTREAM technology, the battery is actively cooled during charging—so it’s ready to go again in as little as 25 minutes with the SCA 16 rapid charger. Bluetooth® connectivity adds even more control.

Automatically start a paired Dust Extractor when the tool powers on, or use the Festool app to monitor charge level, temperature, and usage data. From heavy-duty cutting to continuous extraction, the TBX 8 keeps you working longer—with the power to get through the toughest tasks.

FEATURES

• Maintain performance under load: Tabless cell design reduces heat and internal resistance for more consistent power when tools are pushed hard.
• Keep dust extraction automatic: Bluetooth® starts a paired CLEANTEC Dust Extractor when the tool is switched on.
• Work reliably in tough conditions: Built to perform in both hot and cold environments without compromising output.
• Protect your tools and work surfaces: Soft-touch base helps prevent slipping and reduces contact damage.
• Stay informed on your battery: Use the Festool app to view charge level, temperature, and usage data.
• Check charge at a glance: Integrated LED display shows battery level anytime.
• Work with confidence: Covered by Festool’s 3-year wear-and-tear warranty.
• Run longer on demanding jobs: 8.0 Ah capacity delivers the runtime and sustained power needed for high-load applications.
• Get back to work faster: Low heat generation allows immediate recharging, with AIRSTREAM active cooling bringing the battery back to ready in as little as 25 minutes.

SPECS

• Voltage: 18 V
• Capacity: 8.0 Ah

INCLUDES

• (4) Tabless battery 18 V 8.0 Ah
• (2) SCA 16 rapid charger
• (1) SYS3 M 187