null

Festool MB 40 Mobile Drilling Attachment Set (577971)

UPC:
4014549435540
MPN:
577971
  • Festool MB 40 Mobile Drilling Attachment Set (577971)
  • Festool MB 40 Mobile Drilling Attachment Set (577971)
  • Festool MB 40 Mobile Drilling Attachment Set (577971)
  • Festool MB 40 Mobile Drilling Attachment Set (577971)
  • Festool MB 40 Mobile Drilling Attachment Set (577971)
  • Festool MB 40 Mobile Drilling Attachment Set (577971)
  • Festool MB 40 Mobile Drilling Attachment Set (577971)
  • Festool MB 40 Mobile Drilling Attachment Set (577971)
  • Festool MB 40 Mobile Drilling Attachment Set (577971)
  • Festool MB 40 Mobile Drilling Attachment Set (577971)
  • Festool MB 40 Mobile Drilling Attachment Set (577971)
  • Festool MB 40 Mobile Drilling Attachment Set (577971)
  • Festool MB 40 Mobile Drilling Attachment Set (577971)

Pre-Order Only - Shipping 9/18!!

$263.94
Frequently bought together:

Description

Festool MB 40 Mobile Drilling Attachment Set (577971)

for CXS 12, CXS/TXS 18, TPC 18/4, C 18 and T 18 with FastFix support (not for CXS/TXS)

Get straight, accurate holes every time—no guesswork. The MB 40 helps you drill perfectly at 90 degrees, whether you're on the jobsite or in the shop. Set your depth, line up your holes, and drill clean through wood, metal, or plastic. Need to drill straight down, into end grain, or make a row of holes? No problem. You can hook up dust collection right to the base, so you always see your mark. It’s another FastFix add-on that works with your Festool cordless drill and gives you more ways to get the job done right.

FEATURES

  • Dead-on accurate. Built tough and stable for clean, precise holes.
  • Dial it in. Set exact depth with easy-to-read scale—zero position included. Goes up to 2“ (50 mm), marked in both mm and inches.
  • Built to adapt. Comes with side fence, end-stop, and guide rail adapter for edge work or long panels—repeatable and exact every time.
  • For 32 mm system. Hole series feature makes cabinet drilling simple.
  • Fast setup. Tool chuck locks in by hand—no extra tools needed. Use CENTROTEC for quick bit swaps.
  • Line it up. Base plate markings help you place it right the first time.
  • Dust extractable. Hook up to a CT Dust Extractor with a D27 hose for a clean workspace.
  • Stays put. Rubber base grips tight—no slipping while you drill.
  • All in one box. Packed in a Systainer³ to keep everything in order.

Built for precision.

For clean, straight holes at 90 degrees—every time. The MB 40 is built for that. It’s solid, stable, and easy to dial in your depth with the built-in scale, stops, and adapters.

Works wherever you do.

Bring the tool to the work, not the other way around. The MB 40 is compact and easy to carry, so you can take it to any jobsite.

Fits the way you work.

Made to fit your needs. The FastFix design lets you quickly switch setups to drill into edges or surfaces—all with the same precision.

FastFix attachment

Quick tool changes. Snap in Festool cordless drills and hammer drills—no tools needed.

Depth-control

Set your depth. Drill up to 2" (50 mm) deep with clear depth markings in mm or inches—perfect for cup hinges or series drilling.

Hole series function

32 mm system ready. Comes with 3 mm and 5 mm pins. Set it once—the pin stays in place for the whole run.

Parallel side fence

Edge drilling made easy. Drill straight and parallel to edges, fast and accurate.

Scribe marks

Pinpoint accuracy. Helps with lineups, hinge drilling, and consistent hole spacing.

Dust Extraction

Clean drilling. Hook up a CT Dust Extractor to keep the hole and your workspace clean.

Technical data

  • Holder: FastFix
  • Max. drilling diameter for softwood (Forstner drill bit): 1-9/16" (40 mm)
  • Max. drilling diameter for softwood (auger bit): 5/8" (16 mm)
  • BASE: 4-3/8"x4-1/2" (110 x 114 mm)
  • Height: 12-1/4" (312 mm)
  • Setting range of depth stop: 0 - 2" (0 - 50 mm)
  • Max. screw diameter (templates/fixtures): 5/32" (4 mm)
  • Stroke with depth stop, with spring: 7-3/8" (187 mm)
  • Stroke without depth stop, without spring: 8" (203 mm)
  • Dust extraction connection diameter: 1-1/16" (27 mm)
  • Weight: 3.1 lbs (1.4 kg)

INCLUDES

  • FSA-MB 40 guide rail adapter
  • Parallel side fence with stop for end face holes (PA-MB 40)
  • Hole series pin 5 mm
  • Hole series pin 3 mm
  • TX 15 key
  • Systainer SYS3 M 187
View AllClose
About US Tool & Fastener

US Tool & Fastener is a division of Angel-Guard Products, Inc. We pride ourselves on offering only the very best in woodworking tools and equipment. Our staff is trained to handle all requests professionally, complete, and as quickly as possible.

See Reviews Contact Us