Shaper Tools
Shaper BenchPilot, Workstation and Shelf Upgrade Kit (SCFP1-AJ-NN-SW1-AA-SU1-WSUK1)
- MPN:
- SCFP1-AJ-NN-SW1-AA-SU1-WSUK1
- Availability:
- Pre-Order Only - ETA End of September 2025
Description
Shaper BenchPilot, Workstation and Shelf Upgrade Kit (SCFP1-AJ-NN-SW1-AA-SU1-WSUK1)
Shaper BenchPilot (SCFP1-AJ-NN)
BenchPilot enables automated, hands-free cutting for Origin so you can focus on other tasks at hand.
Clip Origin into BenchPilot and let it drive Origin from point A to point B, while Origin continues to handle the small precision movements. Think of it like autopilot for Origin.
- Drives Origin Automatically
- Variable feed rate control knob
- Clip and unclip Origin easily
- Display shows cut time remaining
- Cut vertically or horizontally
Time Consuming Projects? Yes Please.
Let BenchPilot take on the tedious, intricate, or just plain PITA.
Detailed engravings, clearing large pockets, or other Origin operations that are stressful to complete, are great to hand off to BenchPilot.
HANDS FREE when you need it.
HANDS ON when you want it.
Clip Origin into BenchPilot and you have a trained apprentice.
Unclip Origin from BenchPilot and you have, well, Origin again!
Your choice when you need it. Like enjoying a manual sports car on a winding road but appreciating cruise control on a long highway drive
Shaper Workstation (SW1-AA)
Workstation is our ultimate workspace and fixturing solution for your benchtop cutting operations. It’s designed to streamline and expand upon Origin’s abilities, offering rapid, repeatable and precise fixturing of a wide range of stock configurations.
Workstation features a reusable tape field, easily adjustable shelf for small or difficult-to-fixture workpieces, and intuitive indexing pins for alignment and registration. This greatly reduces setup time and makes it easier than ever to get cutting straight out of the box.
Included:
- Body
- Clamping Face
- Support Bar
- Support Arms
- Shelf
- Angle Fence
- 4mm Wrench
- Hold Down Clamp x 2
- Spoilboard x 4
Technical information:
- Max. Height: 250mm, 9.8 in
- Depth: 465mm, 18.3 in
- Width: 515mm, 20.3 in
- Assembled Weight: 9.75kg, 21.5 lbs
Highly Versatile Fixturing
Workstation combines with Origin to create a precision cutting system that makes even the most demanding projects approachable and intuitive.
Work Outside the Box
Workstation gives you room to experiment and reliability to iterate. Make your own custom fixturing mounts to hold the most unusually shaped workpieces.
-
Flexible options to secure your custom mounts to the Clamping Face.
Perfect Box Joints
Combine Origin’s Box Joint Basic Extension with Workstation to cut precise box joints with ease.
-
Fast and reliable 90° registration every time.
-
Foolproof layout with Origin’s built-in functionality.
-
Out of the box clamping paired with industry standard T-Track to suit any project.
Difficult Workpieces Made Easy
Perform detailed cuts on small or difficult-to-fixture workpieces with the included Shelf.
-
Work on material of almost any thickness using Shelf’s easy height adjustment.
-
Precise depth control and dead flat pockets.
Accurate Mortise & Tenons
The vertical and horizontal work holding capabilities of Workstation let you cut perfect mortise and tenon joinery.
-
Cut tenons at any angle from 0° to 45° with confidence.
-
Virtually eliminate tear out on tenons.
-
Effortlessly cut tenons with dead flat shoulders for tight fitting seams
Shaper Shelf Upgrade Kit (SU1-WSUK1)
Increase cuttable area and provide a flat, rigid surface when cutting with Workstation.
Fine tune the height using the adjustable support leg.
- 11” X 18”
- MDF top
- Replaces small shelf included with Workstation
Related Products
Shaper Origin and Plate Bundle (SO2-NN-SV1-AA)
Shaper Tools
Shaper Origin and Workstation Bundle (SO2-NN-NNSWS)
Shaper Tools
Shaper Origin, Workstation and Plate Bundle (SO2-NN-NNSWS-SV1-AA)
Shaper Tools
ShaperTape (ST1-150)
Shaper Tools