Shaper Tools
Shaper Origin, Workstation, Plate and BenchPilot Bundle (SO2-NN-NNSWS-SV1-AA-SCFP1-AJ-NN)
- MPN:
- SO2-NN-NNSWS-SV1-AA-SCFP1-AJ-NN
- Condition:
- New
- Availability:
- Pre-Order Only - ETA End of September 2025
Description
Shaper Origin, Workstation, Plate and BenchPilot Bundle (SO2-NN-NNSWS-SV1-AA-SCFP1-AJ-NN)
Included:
Shaper Origin with Shaper SM-1 Spindle
Tanos Systainer
Two rolls of Shaper Tape (150-ft each)
Tool change accessories
USB flash drive
¼-inch up-cut spiral cutter
⅛-inch up-cut spiral cutter
60° engraving cutter
Universal dust collection adapter
Origin Specs
Input Power
120VAC, 60Hz. 7ASpindle Motor
720W brushed AC motor10,000 - 26,000 RPM with load-compensating speed control
Soft-start, over-temperature and over-load safety cut-offs
Produced by Festool to Shaper specifications
Collet
Includes a ¼” collet that accepts any commonly available ¼” shank router bits⅛” collet sold separately, available from Shaper
Depth Control
43mm (1.7”) of total Z-axis travelDigitally adjustable depth-of-cut
Automated touch-off sensor
Dust Extraction Port
Designed with the SM-1 spindle to provide optimal debris extraction34mm inner diameter by 39mm outer diameter port dimensions
Fits most standard 27mm (35mm OD) and 36mm suction hoses (e.g. Festool, Fein)
Includes a 6.5’ adaptor hose with a 2 ¼” OD nozzle for use with US-standard wet/dry vacs
Connectivity
Wi-Fi enabled for transfer of design files via ShaperHub, and for receiving software updatesUSB port allows easy offline transfer of design files
Digital Cut Files
Works with standard vector files (.SVG)Includes on-tool design capabilities
Touch Screen
Capacitive multi-touch full-color LCDDimensions
Origin: 13 ¾” (handle-to-handle) x 7 ¾” x 11 ¾”Systainer: 15 ½” x 11 ½” x 17” (SYS 5 T-LOC Systainer)
Weight
Origin: 14.5 lbs
Packaged (with accessories) in Systainer: 23.5 lbsWarranty & Support:
One-year warranty
Highly responsive email support
NEW Shaper Workstation
Workstation is our ultimate workspace and fixturing solution for your benchtop cutting operations. It’s designed to streamline and expand upon Origin’s abilities, offering rapid, repeatable and precise fixturing of a wide range of stock configurations.
Workstation features a reusable tape field, easily adjustable shelf for small or difficult-to-fixture workpieces, and intuitive indexing pins for alignment and registration. This greatly reduces setup time and makes it easier than ever to get cutting straight out of the box.
Included:
- Body
- Clamping Face
- Support Bar
- Support Arms
- Shelf
- Angle Fence
- 4mm Wrench
- Hold Down Clamp x 2
- Spoilboard x 4
Technical information:
- Max. Height: 250mm, 9.8 in
- Depth: 465mm, 18.3 in
- Width: 515mm, 20.3 in
- Assembled Weight: 9.75kg, 21.5 lbs
Highly Versatile Fixturing
Workstation combines with Origin to create a precision cutting system that makes even the most demanding projects approachable and intuitive.
Work Outside the Box
Workstation gives you room to experiment and reliability to iterate. Make your own custom fixturing mounts to hold the most unusually shaped workpieces.
-
Flexible options to secure your custom mounts to the Clamping Face.
Perfect Box Joints
Combine Origin’s Box Joint Basic Extension with Workstation to cut precise box joints with ease.
-
Fast and reliable 90° registration every time.
-
Foolproof layout with Origin’s built-in functionality.
-
Out of the box clamping paired with industry standard T-Track to suit any project.
Difficult Workpieces Made Easy
Perform detailed cuts on small or difficult-to-fixture workpieces with the included Shelf.
-
Work on material of almost any thickness using Shelf’s easy height adjustment.
-
Precise depth control and dead flat pockets.
Accurate Mortise & Tenons
The vertical and horizontal work holding capabilities of Workstation let you cut perfect mortise and tenon joinery.
-
Cut tenons at any angle from 0° to 45° with confidence.
-
Virtually eliminate tear out on tenons.
-
Effortlessly cut tenons with dead flat shoulders for tight fitting seams
Shaper Plate (SV1-AA)
Shaper Plate is the universal template for Origin
Shaper Plate brings efficiency and precision to your projects when installing hardware, inlaying in slabs, corner rounding, routing system 32 holes in cabinetry, and much, much more.
Multiple flags and a fence allow for adaptable fixturing on virtually any workpiece. Plate's pull-down reticle makes it simple to align with marks on your workpiece. The anti-slip backing means that you can use Plate on most surfaces without clamping.
Shaper BenchPilot (SCFP1-AJ-NN)
BenchPilot enables automated, hands-free cutting for Origin so you can focus on other tasks at hand.
Clip Origin into BenchPilot and let it drive Origin from point A to point B, while Origin continues to handle the small precision movements. Think of it like autopilot for Origin.
- Drives Origin Automatically
- Variable feed rate control knob
- Clip and unclip Origin easily
- Display shows cut time remaining
- Cut vertically or horizontally
Time Consuming Projects? Yes Please.
Let BenchPilot take on the tedious, intricate, or just plain PITA.
Detailed engravings, clearing large pockets, or other Origin operations that are stressful to complete, are great to hand off to BenchPilot.
HANDS FREE when you need it.
HANDS ON when you want it.
Clip Origin into BenchPilot and you have a trained apprentice.
Unclip Origin from BenchPilot and you have, well, Origin again!
Your choice when you need it. Like enjoying a manual sports car on a winding road but appreciating cruise control on a long highway drive
Related Products
ShaperTape (ST1-150)
Shaper Tools
