Microjig
Microjig Sauter OFL3.0 Pivoting Router and Lift (MJ-OFL3.0)
- MPN:
- MJ-OFL3.0
- Availability:
- Usually Ships in 10-15 Business Days - Subject to Change
Description
Microjig Sauter OFL3.0 Pivoting Router and Lift (MJ-OFL3.0)
****ROUTER NOT INCLUDED****
Every bit. Every angle.®
The Sauter OFL3.0 Pivoting Router and Lift — exclusively from MicroJig — tilts your existing bits to any angle from –5° to +50°, with snap-in presets at the angles you use most. Straight bits cut chamfers, profile bits multiply into new shapes, and splines land at the exact angle of your staves. Everything a standard lift does, then so much more. Precision German engineering.
Precision at every angle.
Take control of every cut with precise angle adjustment from -5° to +50°. The OFL3.0 lets you position your router exactly where you need it, making it easier to achieve clean, consistent results across a wide range of angled routing applications. Whether you're creating bevels, grooves, splines, or other specialty cuts, you get the control and repeatability your projects demand.
Go beyond straight cuts.
Your router table can now do much more than straight 90° cuts. With the OFL3.0, simply pivot the router to the angle you need and unlock new possibilities for your everyday router bits. Create angled chamfers, matching spline cuts, drawer pulls, and other specialty profiles without investing in a dedicated tilting machine.
Make every angle possible.
Give your router table the flexibility to tackle projects from a whole new perspective. The OFL3.0 pivots from -5° to +50°, allowing you to dial in the angle required for your project with precision. From subtle bevels to more demanding angled cuts, you can expand what your existing router bits can accomplish—all with one versatile system.
- Tilt any bit up to 50° — straight bits become chamfer bits, profile bits multiply into new shapes, and angle-designed bits finally run as intended: shaper capability at your router table.
- Every angle, repeatable — snap-in presets at 15°, 22.5°, 30°, and 45° across the full –5° to +50° range, with a vernier scale for everything between.
- Bit changes stay easy — the lift travels fore and aft to keep the bit centered in the throat opening at any angle, and every adjustment is 100% tool-free.
- The only complete system on the market — Swiss-made — 2 HP variable-speed motor (3,500–30,000 RPM), 1/4" and 1/2" collets, three magnetic throat plates, wrenches, and an undermounted dust shield included.
- Drops into your table — machined-aluminum plate with leveling screws fits the standard 11-3/4" × 9-1/4" opening, commercial or shop-built.
- Smooth, precise, German-made — Sauter precision engineering on every tilt, travel, and height move.