Woodpeckers Metric T-Square 600mm (TS-600-20)

Usually Ships in 1-2 Buisness Days - Subject to Change
  • Woodpeckers Metric T-Square 600mm (TS-600-20)
  • Woodpeckers Metric T-Square 600mm (TS-600-20)
  • Woodpeckers Metric T-Square 600mm (TS-600-20)
  • Woodpeckers Metric T-Square 600mm (TS-600-20)
  • Woodpeckers Metric T-Square 600mm (TS-600-20)
  • Woodpeckers Metric T-Square 600mm (TS-600-20)
  • Woodpeckers Metric T-Square 600mm (TS-600-20)
  • Woodpeckers Metric T-Square 600mm (TS-600-20)
  • Woodpeckers Metric T-Square 600mm (TS-600-20)
  • Woodpeckers Metric T-Square 600mm (TS-600-20)
Frequently bought together:


Woodpeckers Metric T-Square 600mm (TS-600-20) - Draw straighter, more accurate lines in less time.



Striking lines parallel with the edge of your stock couldn’t be easier, once you have a Woodpeckers Precision T-Square in your shop.  The beam has a lip that rests on the top surface of your stock, preventing the tool from rolling like many T-squares. Precision machined scribing guides are spaced every sixteenth-inch down the length of the blade.  Just drop in the point of a mechanical pencil and scribe a perfectly parallel line by holding the pencil in one hand and sliding the T-square with the other.  In addition to the scribing guides, there are ¼” diameter holes on 1” centers, ideal for laying out shelf pins.  


Each Woodpeckers T-Square consists of a laser engraved aluminum blade matched to a precision machined beam. The two critical components are secured together with either 4 or 6 stainless steel screws (depending on which blade length you choose).  A slight offset between the holes in the blade and the threads in the beam put the two under constant tension. This design delivers an angular precision of ±.02 degrees (.004” per foot). It delivers top notch performance yet allows the blade to be replaced should it be damaged.


Two support lips machined into the beam prevent tipping and rolling. The blade has scribing guides every sixteenth-inch.  Place the tip of a mechanical pencil in the hole, slide it along your work piece and lay down lines exactly parallel to the edge of your stock. 


The edges of the blade are beveled 30°, putting the scale markings right down next to your stock, eliminating parallax error. The scales are laser-engraved to a tolerance of ±.004" total accumulated error. The white engraving on our famous “Woodpeckers Red” anodized finish delivers a very readable contrast, even for older eyes or poor lighting conditions. Additional 1/4" holes are machined on 1" centers for marking shelf pin locations. Each T-Square is delivered with a wall-mountable Rack-It™ to keep your Precision T-square right in plain sight and always ready for the next project.  


We offer four versions of our T-square:  12", 24", 600mm and 32". The 12" size is ideal for work with solid lumber and smaller cabinet parts. The 24", 600mm and 32" are better suited for work with sheet goods, larger cabinet parts, entertainment centers and bookcases.


Like all Woodpeckers products, these T-squares are proudly machined and carefully inspected in Strongsville, OH facility, just south of Cleveland.  



  • 600mm Blade
  • Precisely machined, laser engraved aluminum blade
  • Perfectly fitted to a solid, billet handle with support steps to prevent tipping
  • Both critical parts are fastened together with screws offset to create tension between the blade and handle for mechanical soundness
  • Blade has precisely spaced 1mm holes machined every 2mm
  • These holes fit both standard and mechanical pencils
  • Additional holes are machined on exact 1" centers for marking shelf pin locations
  • Blade edges are formed at a 30 degree bevel
  • Blade edges are engraved with precise metric scale markings graduated to 1mm
  • Packed in a fitted, wooded, wall mountable case for safe storage
  • Made in the USA


  • Beveled edge design reduces parallax and increases measuring and marking accuracy
  • 600mm blade is perfect for sheet goods, cabinetry and general furtniture projects
  • Stick a pencil in the holes in the blade, slide along your work piece, and you have a perfectly spaced line accurately following the stock edge
  • Every marking is laser perfect and every hole is accurately spaced. 
  • Accurate to fractions of a thousandth of an inch.


  • (1) Woodpeckers | Metric T-Square 600mm (TS-600MM)
  • (1) Wooden case
View AllClose

Warranty Information

Manufacturer Warranty
View AllClose
About US Tool & Fastener

US Tool & Fastener is a division of Angel-Guard Products, Inc. We pride ourselves on offering only the very best in woodworking tools and equipment. Our staff is trained to handle all requests professionally, complete, and as quickly as possible.

See Reviews Contact Us